RockSolid Industrial Moisture Stopping H2O Primer Kit
Model Number: RSI-HSPH20-1.5G
Description & Documents
RockSolid Industrial Moisture Stopping H20 Primer is a two component, water-based, 50% solids, moisture vapor transmission (MVT) blocking and pH resistant epoxy primer used to remedy concrete floors with high moisture levels before the application of finish coatings. Capable of holding back up to 12 lbs. of MVT (two coats), this primer has excellent adhesion to moisture laden concrete slabs. RockSolid Industrial Hydro Stopping H2O Primer can be applied to concrete as early as 48 hours after placement, reducing job-site downtime and delays in production. This coating should be used when calcium chloride test results are higher than the specified 3 lbs./1000 sf/24 hours rating, or when pH levels exceed 7-8 using test strips.
- 1.5 gallon kit
- 2 parts A : 1 Part B mix ratio
- 1 Coat - Applied with 1/8" Notched Squeegee and Backroll at 375 sf/kit holds back up to 6 lbs. of MVT (3/8" NAP x 18" Roller)
- 2 Coats - Second coat applied with 1/8" Notched Squeegee and Backroll at 375 sf/kit holds back up to 12 lbs. of MVT (3/8" NAP x 18" Roller)
Brand Name: RockSolid Floors
Please Note: Prices, promotions, styles and availability may vary by store and online. While we do our best to provide accurate item availability information, we cannot guarantee in-stock status and availability as inventory is sold and received continuously throughout the day. Inventory last updated 12/20/2014 at 5:00am EST. Online orders and products purchased in-store qualify for rebate redemption. Rebates are provided in the form of a merchandise credit check which can only be used in a Menards store.