Bostitch Low Profile 28-Degree Wire Weld Framing Nailer
Model Number: LPF28WW
Menards® SKU: 2082952
Description & Documents
The Bostitch Low Profile 28 Degree Wire Weld Framing Nailer features a 12.5" height low profile design for getting in between rafters and tight spaces. It accepts 2"-3"-1/4" .113"-.131" fasteners. The magazine can hold 92 fasteners so you don't have to slow down to re-load as often. The nailer is very lightweight at 7.6 lbs for less fatigue in prolonged applications. It also delivers 840 inch pounds at 100 PSI to provide the power to drive fasteners through the toughest applications. A tool-free selectable trigger allows for single-drive or multi-drive mode with the flip of a switch while tool-free depth of drive adjustment is designed for precise sinking of fasteners. An adjustable rafter hook is designed so you can have an extra hand free when needed. The internal air filter prevents harmful contaminants from entering the engine for extended tool life and last nail retention magnet prevents the last nail from dropping out of the nose of the tool. This low profile framing nailer is backed by a 7 Year Bostitch Warranty.
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.
- Drives 28 degree wire weld 2" - 3-1/4" .113"-.131" framing nails
- 12.5" low profile height
- 7.6 lb
- 840 in. lb at 100 PSI
- 92 nail capacity
- Rafter hook
- Rubber grip
- Internal air filter
- Last nail retention magnet
- 7-year warranty
|Collation Type: Wire
||Fastener Format: stick
|Fastener Gauge Range: .113"-.131"
||Case Included: No
|Nailer/Stapler Design: Framing Nailer
||Fastener Length Range: "2 - 3.25"
|Fasteners Used: 28 Degree Wire Weld Nails
||Manufacturer's Warranty: 7 Year Limited