11"x15" SW/Texas Thermoplastic Base No Calk Roof Flashing for 2" Pipe
Model Number: 11918
Description & Documents
Non-fading and non-cracking, rigid black thermoplastic base roof flashing that slides over DWV pipe on roof for pitch to 45 degrees, Southwest/Texas base for code required areas..
- Non-fading and non-cracking, rigid black thermoplastic base.
- Self-sealing collar slides over pipe and requires no calking
- Can be used in commercial or residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required.
- Rated 180°F continuous heat.
- Approved for Type B installations.
- Plastic base roof flashing slides over DWV pipe for pitch from 0 - 45° or up to 12/12 roof.
- Not for hot-mopped or built-up roofs.
- Non-fading sealing collar.
- Do not use petroleum based products or paint on flashing collar.
- Southwest/Texas base for code required areas.
Dimensions: 11"x15" Black Thermoplastic Base for 2" Pipe
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.