Description & Documents
SA451201 The SchraderAir Duplex Professional Series with Two (2) 5 HP motors and a 120-Gallon Horizontal tank provides high CFM with Single or Three Phase power. The Dual pump and motor configuration allows for more efficient cooling and longer compressor life. The energy saving duplexing controller manages air demand by alternating equally between both sets of pumps and motors. This unit features Two (2) 5 HP - 230 Volt Single Phase Baldor energy efficient, EISA compliant motor; a finned intercooler which cools air delivery into a second stage providing greater compression and efficiency; a finned after-cooler which provides lower exhaust temperatures for maximum check valve life; heavy duty cast iron pumps at a low 800 rpm; a heavy duty inlet filter silencer; an easy-to-read oil sight gauge; a Magnetic starter with thermal overload protection; an easy-to-read tank pressure gauge; a factory preset pressure switch that is set to come on at 145 and off at 175 PSI; reliable splash lubrication; an ASME Certified tank. This unit also includes four (4) mounting pads, four (4) mounting bushings and a tank drain extension. This unit carries a (1) year limited warranty and is assembled in the USA. 32.2 SCFM @ 175 PSI.
- 2-Stage 175 PSI Professional Compressor
- Dual pump configuration
- More efficient cooling and longer life
- Finned Inner Cooler
- Oil Sight Gauge
- Preset Pressure switch
- Easy to read tank gauge 0-300PSI
- Includes 4 Mtg Pads and 4 Mtg Bushings
- Hi-Flow Steel Belt Guard
- 2-Drive Belts for efficiency
- Magnetic Starter w/ Thermal Overload
Brand Name: Schrader
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.